Quality Testing Instruments
Model: S0014 Seam Fatigue Tester
This Seam Fatigue Tester was designed to test the strength of a sewn seam in a fabric. It operates by lifting a 3 kg weight using the sewn fabric as a ‘tow rope’. The 3 kg mass is dropped onto a shelf at the end of each stroke and lifted again by the fabric. The shelf height is adjustable so that the mass can be set down gently without too much jerk. The machine is double-ended and two sets of specimens can be tested at each end.
  • Textiles
  • Cycle Speed: 30 per/min
  • Stroke: 150 mm
  • Jaws: 4 x sets 50 mm wide
  • Pre-determined counter: 4 digits
  • Dropping mass: 4 x 3 kg
  • Sample length: 180 mm
  • Adjustable shelf height
  • Double ended, with 4 specimen testing capabilities
  • Limit Switch (stops machine if cover is opened)
  • Safety cover over moving parts
  • GMW 3405
  • Variable Cycle Speed
  • Variable Stroke
  • Electrical: 220/240 VAC @ 50 Hz or 110 VAC @ 60 Hz (please specify when ordering)
  • H: 1,000 mm
  • W: 1,500 mm
  • D: 600 mm
  • Weight: 110 kg